Location Pin Google Maps

To Report to Image & Display reserch building, Rm 107 & Rm 023 Comms room arrived 10:15 2/7/2021 Left 17:03 2/7/2021

Arrive 10:09 1. Meet Ryan & Martin Ward RAW electrical Services Ltd. 2. NTU health and safety induction with Martin Waring NTU. 3. Collected all materials from Rm 107 4. Installed Palo Alto 3220 FW, Extreme X460 MT01 & Juniper EX4600 XT01 in Racks 1 & 2 Rm 023. 5. Labelled all servers NFV & MGMT. 6. Labelled and connected all Cat6a cables Red, Gray, Blue and White to NFV & MGMT servers. 7. Ran internet connection to Cat6a Patch Panel tested with my laptop set to DHCP sent email of connection picture as test, OK. 8. Tidy up comms room Depart 17:03

Google Maps Timeline

Click To Enlarge

Palo Alto 3220

Extreme X460

Juniper EX4600

SI Spreadsheet&Simplified Label Full label in SI Spread sheet

Cat 6a patchpanel in rack, (see internet feed) No MMF & SMF patch Panel in either rack.

Fibre Optic MMF patch cables are violet not light blue

Rack 1

MGMT 1,2,3 NFV 5,6

Rack 1

Rack 2

Port one of Cat6a patch panel in Rack 2/RM023 connected to

port 48 on aruba 6300F in rack at back of RM107

Photos

MMF patch panel to be installed cables to be labeled and connected from Juniper EX4600

SMF patch panel to be installed, SMF cables to be connected to SMF patch panel, (when Installed

KVM Panel CS1225 to be powered on and connected to KVM Swich CL 1000M

All Cables, Labels, SFPs, Monitor & Kybd, Cage nuts etc in boxes

KVM Switch Not insalled, Needs to be connected to the flat panel

LCD Tablet and Keyboard not powered up should be connected to all servers via KVM switch when installed

NDAC not installedFibre patch panels not installed MMF & SMF